The electronic components TC75S55F/TC75S55FU/TC75S55FE is a CMOS singleoperation amplifier which incorporates a phase compensation circuit. It is designed for use with a low- voltage, low-current power supply; this differentiates this device from conventional general-purpose bipolar op-amps.
Features follows:
1.Low-voltage operation : VDD = ±0.9~3.5 V or 1.8~7 V
2.Low-current power supply : IDD (VDD = 3 V) = 10 μA (typ.)
3.any external device
4.Ultra-compact package
Above information from hqew.net,provides TC75S55F online trading service and TC75S55F In- stock for you and other top model such as lm358,lm317,ne555,lm324,lm339.
Supply with the electronic component, such as ICs , Semiconductor，Capacitors, Inductors, Quartz Crystal Devices,Resistors,Connectors,Switches,LEDs,Wires , Cables and so on. It is a professional IC trading market.
Thursday, April 28, 2011
Electronic components TC75S55F and IC trading market Site recommended
The electronic components TC75S55F/TC75S55FU/TC75S55FE is a CMOS singleoperation amplifier which incorporates a phase compensation circuit. It is designed for use with a low- voltage, low-current power supply; this differentiates this device from conventional general-purpose bipolar op-amps.
Features follows:
1.Low-voltage operation : VDD = ±0.9~3.5 V or 1.8~7 V
2.Low-current power supply : IDD (VDD = 3 V) = 10 μA (typ.)
3.any external device
4.Ultra-compact package
Above information from hqew.net,provides TC75S55F online trading service and TC75S55F In- stock for you and other top model such as lm358,lm317,ne555,lm324,lm339.
Supply with the electronic component, such as ICs , Semiconductor，Capacitors, Inductors, Quartz Crystal Devices,Resistors,Connectors,Switches,LEDs,Wires , Cables and so on. It is a professional IC trading market.
Features follows:
1.Low-voltage operation : VDD = ±0.9~3.5 V or 1.8~7 V
2.Low-current power supply : IDD (VDD = 3 V) = 10 μA (typ.)
3.any external device
4.Ultra-compact package
Above information from hqew.net,provides TC75S55F online trading service and TC75S55F In- stock for you and other top model such as lm358,lm317,ne555,lm324,lm339.
Supply with the electronic component, such as ICs , Semiconductor，Capacitors, Inductors, Quartz Crystal Devices,Resistors,Connectors,Switches,LEDs,Wires , Cables and so on. It is a professional IC trading market.
Wednesday, April 27, 2011
Description and Features about electronic component D45C12
The electronic components D45C12 and D44C12 are[1]for general purpose driver or
medium power output stages in CW or switching applications.
Features
1.Low Collector-Emitter Saturation Voltage - 0.5 V (Max)
2.High ft for Good Frequency Response
3.Low Leakage Current
4.Pb-Free Packages are Available
Above information from Hqew.net,that provides you with electronic components D45C12
reference price, source and loation, semiconductor, original spot, free PDF download
Datasheet data and other information, D45C12 on Hqew.net.
If you want to know more about the electronic component information,Or popular model
word, or difficult to find models word,such as lm358,lm317,ne555,lm324,lm339,Please go to
Hqew.net.
medium power output stages in CW or switching applications.
Features
1.Low Collector-Emitter Saturation Voltage - 0.5 V (Max)
2.High ft for Good Frequency Response
3.Low Leakage Current
4.Pb-Free Packages are Available
Above information from Hqew.net,that provides you with electronic components D45C12
reference price, source and loation, semiconductor, original spot, free PDF download
Datasheet data and other information, D45C12 on Hqew.net.
If you want to know more about the electronic component information,Or popular model
word, or difficult to find models word,such as lm358,lm317,ne555,lm324,lm339,Please go to
Hqew.net.
Description and Features about electronic component D45C12
The electronic components D45C12 and D44C12 are[1]for general purpose driver or
medium power output stages in CW or switching applications.
Features
1.Low Collector-Emitter Saturation Voltage - 0.5 V (Max)
2.High ft for Good Frequency Response
3.Low Leakage Current
4.Pb-Free Packages are Available
Above information from Hqew.net,that provides you with electronic components D45C12
reference price, source and loation, semiconductor, original spot, free PDF download
Datasheet data and other information, D45C12 on Hqew.net.
If you want to know more about the electronic component information,Or popular model
word, or difficult to find models word,such as lm358,lm317,ne555,lm324,lm339,Please go to
Hqew.net.
medium power output stages in CW or switching applications.
Features
1.Low Collector-Emitter Saturation Voltage - 0.5 V (Max)
2.High ft for Good Frequency Response
3.Low Leakage Current
4.Pb-Free Packages are Available
Above information from Hqew.net,that provides you with electronic components D45C12
reference price, source and loation, semiconductor, original spot, free PDF download
Datasheet data and other information, D45C12 on Hqew.net.
If you want to know more about the electronic component information,Or popular model
word, or difficult to find models word,such as lm358,lm317,ne555,lm324,lm339,Please go to
Hqew.net.
Tuesday, April 26, 2011
Applications and Features about electronic component B57621 from Hqew.net
Applications
1.Temperature measurement and
compensation in
– hybrid circuits
– data systems
– telecom systems
– automotive electronics
Features
1.Silver palladium termination (AgPd)
2.Cost-effective
3.Suitable for wave and reflow soldering
Above information from Hqew.net,that provides you with electronic components B57621 reference price, source and loation, semiconductor, original spot, free PDF download Datasheet data and other information, B576212 on Hqew.net.
If you want to know more about the electronic component information,Or popular model word, or difficult to find models word,such as lm358,lm317,ne555,lm324,lm339,Please go to Hqew.net.
1.Temperature measurement and
compensation in
– hybrid circuits
– data systems
– telecom systems
– automotive electronics
Features
1.Silver palladium termination (AgPd)
2.Cost-effective
3.Suitable for wave and reflow soldering
Above information from Hqew.net,that provides you with electronic components B57621 reference price, source and loation, semiconductor, original spot, free PDF download Datasheet data and other information, B576212 on Hqew.net.
If you want to know more about the electronic component information,Or popular model word, or difficult to find models word,such as lm358,lm317,ne555,lm324,lm339,Please go to Hqew.net.
Sunday, April 24, 2011
General features,Description and Applications about Electronic components STB75NF20 series
Electronic component STB75NF20,STP75NF20 and STW75NF20 is series model,General features,Description and Applications belows:
General features
1.Exceptional dv/dt capability
2.Low gate charge
3.100% Avalanche tested
Description
This Power MOSFET series realized with STMicroelectronics unique STripFET™ process
has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced highefficiency isolated DC-DC converters
Applications
Switching application
Hqew.net provide you with the national semiconductor STB75NF20 original spot information, price reference, free PDF download Datasheet material,other hot model lm358,lm317,ne555,lm324,lm339.
FEATURES,APPLICATIONS and DESCRIPTION about electronic components BF240
General features
1.Exceptional dv/dt capability
2.Low gate charge
3.100% Avalanche tested
Description
This Power MOSFET series realized with STMicroelectronics unique STripFET™ process
has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced highefficiency isolated DC-DC converters
Applications
Switching application
Hqew.net provide you with the national semiconductor STB75NF20 original spot information, price reference, free PDF download Datasheet material,other hot model lm358,lm317,ne555,lm324,lm339.
FEATURES,APPLICATIONS and DESCRIPTION about electronic components BF240
Thursday, April 21, 2011
Description Introduction about IC parts BP5220A, BP5221A
The electronic components BP5220A, BP5221A, electronic component BP5222A, are DC / DC converters that use a pulse width modulation (PWM) system. They contain control circuits, switching devices, rectifiers, and coils, and operate by only connecting an I / O smoothing capacitor.
With a high efficiency of power conversion, the modules are available in stand-alone
9-pin SIP packages with no heat sink required. They can be applied to various purposes by fine-adjusting the output voltage and switching on and off. With a wide range of input voltage, the modules are best suited for obtaining a stable local power supply from a main power supply with a large voltage variation.
With a high efficiency of power conversion, the modules are available in stand-alone
9-pin SIP packages with no heat sink required. They can be applied to various purposes by fine-adjusting the output voltage and switching on and off. With a wide range of input voltage, the modules are best suited for obtaining a stable local power supply from a main power supply with a large voltage variation.
Description Introduction about IC parts 74LVX161284A
The electronic components LVX161284A contains eight bidirectional data buffers and eleven control/status buffers to implement a full IEEE 1284 compliant interface. The device supports the IEEE 1284 standard, with the exception of output slew rate,and is intended to be used in an Extended Capabilities Port mode (ECP). The pinout allows for easy semiconductor connection from the Peripheral (A-side) to the Host (cable side).
Outputs on the cable side can be configured to be either open drain or high drive (± 14 mA) and are connected to aseparate power supply pin (VCCcable) to allow these outputs
to be driven by a higher supply voltage than the A-side. The pull-up and pull-down series termination resistance of these outputs on the cable side is optimized to
drive an external cable. In addition, all inputs (except HLH) and outputs on the cable side contain internal pull-up resistors connected to the VCCcable supply to provide proper termination and pull-ups for open drain mode.
If you are engaged in electronic component industry, recommend a professional
website,Hqew.net is a Global famous semiconductor,capacitor transaction platform,more Ic parts supply,such as lm358,lm317,ne555,lm324,lm339.
Outputs on the cable side can be configured to be either open drain or high drive (± 14 mA) and are connected to aseparate power supply pin (VCCcable) to allow these outputs
to be driven by a higher supply voltage than the A-side. The pull-up and pull-down series termination resistance of these outputs on the cable side is optimized to
drive an external cable. In addition, all inputs (except HLH) and outputs on the cable side contain internal pull-up resistors connected to the VCCcable supply to provide proper termination and pull-ups for open drain mode.
If you are engaged in electronic component industry, recommend a professional
website,Hqew.net is a Global famous semiconductor,capacitor transaction platform,more Ic parts supply,such as lm358,lm317,ne555,lm324,lm339.
Wednesday, April 20, 2011
DESCRIPTION about electronic component LVX273 and Industry web recommended
The semiconductor LVX273 has eight edge-triggered D-type flip-flops with
individual D inputs and Qoutputs. The common buffered Clock (CP) and Master Reset (MR)
input load and reset (clear) all flip-flops simultaneously.
The register is fully edge-triggered. The state of each Dinput, one setup time before the
LOW-to-HIGH clock transition,is transferred to the corresponding flip-flop’s Q output.
All outputs will be forced LOW independently of Clock or Data inputs by a LOW voltage
level on the MR input.
The device is useful for applications where the true output only
is required and the Clock and Master Reset are common to all storage elements. The inputs
tolerate up to 7V allowing interface of 5V systems to 3V systems.
The following information about electronic component M41T00 features from Hqew.net.
Hqew.net have plenty of cash, credible suppliers, M41T00 PDF material Hqew.net is Now the
world's largest electronic components, dedicated to one exchange site terminal suppliers
and purchasers.otehr hot model such as lm358,lm317,ne555,lm324,lm339 supply.
individual D inputs and Qoutputs. The common buffered Clock (CP) and Master Reset (MR)
input load and reset (clear) all flip-flops simultaneously.
The register is fully edge-triggered. The state of each Dinput, one setup time before the
LOW-to-HIGH clock transition,is transferred to the corresponding flip-flop’s Q output.
All outputs will be forced LOW independently of Clock or Data inputs by a LOW voltage
level on the MR input.
The device is useful for applications where the true output only
is required and the Clock and Master Reset are common to all storage elements. The inputs
tolerate up to 7V allowing interface of 5V systems to 3V systems.
The following information about electronic component M41T00 features from Hqew.net.
Hqew.net have plenty of cash, credible suppliers, M41T00 PDF material Hqew.net is Now the
world's largest electronic components, dedicated to one exchange site terminal suppliers
and purchasers.otehr hot model such as lm358,lm317,ne555,lm324,lm339 supply.
Tuesday, April 19, 2011
Electronic components Industry recommended and model introduction
Electronic components famous enterprise is Hqew.net,many hot model such as Lm358,lm317， ne555 and so on,other 74LV74,Introduces the FEATURES about electronic components 74LV74 and electronic component lm358 details.
FEATURES
1.Wide operating voltage: 1.0 to 5.5V
2.Optimized for Low Voltage applications: 1.0 to 3.6V
3.Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V
4.Typical VOLP (output ground bounce) 0.8V @ VCC = 3.3V,
Tamb = 25°C
5.Typical VOHV (output VOH undershoot) 2V @ VCC = 3.3V,
Tamb = 25°C
6.Output capability: standard
7.ICC category: flip-flops
The electronic component LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages.
FEATURES
1.Wide operating voltage: 1.0 to 5.5V
2.Optimized for Low Voltage applications: 1.0 to 3.6V
3.Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V
4.Typical VOLP (output ground bounce) 0.8V @ VCC = 3.3V,
Tamb = 25°C
5.Typical VOHV (output VOH undershoot) 2V @ VCC = 3.3V,
Tamb = 25°C
6.Output capability: standard
7.ICC category: flip-flops
The electronic component LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages.
Thursday, April 14, 2011
Description about ic components M41T00 introduction
The following information about electronic component M41T00 description from Hqew.net below:
The M41T00 is a low power serial real time clock with a built-in 32.768 kHz oscillator (external crystal controlled). Eight bytes of the RAM are used for the clock/calendar function and are configured in binary coded decimal (BCD) format.
Addresses and data are transferred serially via a two-line bidirectional bus. The built-in address register is incremented automatically after each WRITE or READ data byte.
The electronic components M41T00 clock has a built-in power sense circuit which detects power failures and
automatically switches to the battery supply during power failures. The energy needed to
sustain the RAM and clock operations can be supplied from a small lithium coin cell.
Typical data retention time is in excess of 5 years with a 50 mA/h 3 V lithium cell (see
Section 2.10:Data retention mode for AC/DC characteristics).
The M41T00 is supplied in 8-lead plastic small outline package.
The M41T00 is a low power serial real time clock with a built-in 32.768 kHz oscillator (external crystal controlled). Eight bytes of the RAM are used for the clock/calendar function and are configured in binary coded decimal (BCD) format.
Addresses and data are transferred serially via a two-line bidirectional bus. The built-in address register is incremented automatically after each WRITE or READ data byte.
The electronic components M41T00 clock has a built-in power sense circuit which detects power failures and
automatically switches to the battery supply during power failures. The energy needed to
sustain the RAM and clock operations can be supplied from a small lithium coin cell.
Typical data retention time is in excess of 5 years with a 50 mA/h 3 V lithium cell (see
Section 2.10:Data retention mode for AC/DC characteristics).
The M41T00 is supplied in 8-lead plastic small outline package.
Characteristics and DESCRIPTION about electronic components L6201
1.SUPPLY VOLTAGE UP TO 48V
2.5A MAX PEAK CURRENT (2A max. for electronic components L6201)
3.TOTAL RMS CURRENT UP TO
4.L6201: 1A; L6202: 1.5A; L6203/L6201PS: 4A
5.RDS (ON) 0.3 W (typical value at 25 °C)
6.CROSS CONDUCTION PROTECTION
7.TTL COMPATIBLE DRIVE
8.OPERATING FREQUENCY UP TO 100 KHz
9.THERMAL SHUTDOWN
10.INTERNAL LOGIC SUPPLY
11.HIGH EFFICIENCY
DESCRIPTION
The I.C. is a full bridge driver for motor control applications realized in Multipower-BCD
technology which combines isolated DMOS power transistors with CMOS and Bipolar circuits
on the same chip.
By using mixed technology it has been possible to optimize the logic circuitry and the
power stage to achieve the best possible performance. The DMOS output transistors can
operate at supply voltages up to 42V and efficiently at high switching speeds. All the
logic inputs are TTL, CMOS and mC compatible. Each channel (half-bridge) of the device is
controlled by a separate logic input, while a common enable controls both channels.
The I.C. is mounted in three different packages.
The above information from a web site Hqew.net,A professional electronic component trading
market and platform,If you are engaged in IC industry,Suggest you go to the web in search
of the information of you need material.Offer popular hot ic components model for example
lm358,lm317,ne555,lm324,lm339.
2.5A MAX PEAK CURRENT (2A max. for electronic components L6201)
3.TOTAL RMS CURRENT UP TO
4.L6201: 1A; L6202: 1.5A; L6203/L6201PS: 4A
5.RDS (ON) 0.3 W (typical value at 25 °C)
6.CROSS CONDUCTION PROTECTION
7.TTL COMPATIBLE DRIVE
8.OPERATING FREQUENCY UP TO 100 KHz
9.THERMAL SHUTDOWN
10.INTERNAL LOGIC SUPPLY
11.HIGH EFFICIENCY
DESCRIPTION
The I.C. is a full bridge driver for motor control applications realized in Multipower-BCD
technology which combines isolated DMOS power transistors with CMOS and Bipolar circuits
on the same chip.
By using mixed technology it has been possible to optimize the logic circuitry and the
power stage to achieve the best possible performance. The DMOS output transistors can
operate at supply voltages up to 42V and efficiently at high switching speeds. All the
logic inputs are TTL, CMOS and mC compatible. Each channel (half-bridge) of the device is
controlled by a separate logic input, while a common enable controls both channels.
The I.C. is mounted in three different packages.
The above information from a web site Hqew.net,A professional electronic component trading
market and platform,If you are engaged in IC industry,Suggest you go to the web in search
of the information of you need material.Offer popular hot ic components model for example
lm358,lm317,ne555,lm324,lm339.
Wednesday, April 13, 2011
Describe and characteristics about ic components LMC568 details
The electronic components LMC568 is an amplitude-linear phase-locked loop consisting of a linear
VCO, fully balanced phase detectors, and a carrier detect output. LMCMOS™ technology is employed for
high performance with low power consumption.
The VCO has a linearized control range of ±30% to allow demodulation of FM and FSK signals. Carrier
detect is indicated when the PLL is locked to an input signal greater than 26 mVrms. electronic component LMC568 applications include FM SCA and TV second audio program decoders, FSK data demodulators,and voice pagers.
Features
1.Demodulates ±15% deviation FM/FSK signals
2.Carrier Detect Output with hysteresis
3.Operation to 500 kHz input frequency
4.Low THD—0.5% typ. for ±10% deviation
5.2V to 9V supply voltage range
6.Low supply current drain
The above information from a web site Hqew.net,A professional Ic trading market and
platform,If you are engaged in IC industry,Suggest you go to the web in search of the
information of you need material.Offer popular hot ic components model for example
lm358,lm317,ne555,lm324,lm339.
VCO, fully balanced phase detectors, and a carrier detect output. LMCMOS™ technology is employed for
high performance with low power consumption.
The VCO has a linearized control range of ±30% to allow demodulation of FM and FSK signals. Carrier
detect is indicated when the PLL is locked to an input signal greater than 26 mVrms. electronic component LMC568 applications include FM SCA and TV second audio program decoders, FSK data demodulators,and voice pagers.
Features
1.Demodulates ±15% deviation FM/FSK signals
2.Carrier Detect Output with hysteresis
3.Operation to 500 kHz input frequency
4.Low THD—0.5% typ. for ±10% deviation
5.2V to 9V supply voltage range
6.Low supply current drain
The above information from a web site Hqew.net,A professional Ic trading market and
platform,If you are engaged in IC industry,Suggest you go to the web in search of the
information of you need material.Offer popular hot ic components model for example
lm358,lm317,ne555,lm324,lm339.
Tuesday, April 12, 2011
Features and Mechanical Data about electronic components BAT54-V
Features
* These diodes feature very low turn-on
voltage and fast switching
* These devices are protected by a PN
junction guard ring against excessive
voltage, such as electrostatic
discharges
* Lead (Pb)-free component
* Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
Mechanical Data
* Case: SOT23 plastic case
* Weight: approx. 8.8 mg
* Packaging codes/options:
* GS18/10k per 13" reel (8 mm tape), 10k/box
* GS08/3k per 7" reel (8 mm tape), 15k/box
The above information from a web site Hqew.net,A professional Ic trading market and platform,If you are engaged in electronic components industry,Suggest you go to the web in search of the information of you need material.Offer popular hot electronic component model for example lm358,lm317,ne555,lm324,lm339.
Monday, April 11, 2011
description and features about Ic components BAT54AWT1
electronic components SBR3U150LP description and features:
These Schottky barrier diodes are designed for high speed switching
applications, circuit protection, and voltage clamping. Extremely low
forward voltage reduces conduction loss. Miniature surface mount
package is excellent for hand held and portable applications where
space is limited.
Features
1.Extremely Fast Switching Speed
2.Low Forward Voltage 0.35 V (Typ) @ IF = 10 mAdc
3.Pb Free Packages are Available
Offer popular hot electronic components model for example lm358,lm317,ne555,lm324,lm339,If you want to understand these information,I recommend a web site for you Hqew.net.
These Schottky barrier diodes are designed for high speed switching
applications, circuit protection, and voltage clamping. Extremely low
forward voltage reduces conduction loss. Miniature surface mount
package is excellent for hand held and portable applications where
space is limited.
Features
1.Extremely Fast Switching Speed
2.Low Forward Voltage 0.35 V (Typ) @ IF = 10 mAdc
3.Pb Free Packages are Available
Offer popular hot electronic components model for example lm358,lm317,ne555,lm324,lm339,If you want to understand these information,I recommend a web site for you Hqew.net.
Thursday, April 7, 2011
FEATURES about ic components L6561 and IC site recommended
FEATURES below:
1.VERY PRECISE ADJUSTABLE OUTPUT
OVERVOLTAGE PROTECTION
2.MICRO POWER START-UP CURRENT (50μA
TYP.)
3.VERY LOW OPERATING SUPPLY
CURRENT(4mA TYP.)
4.INTERNAL START-UP TIMER
5.CURRENT SENSE FILTER ON CHIP
6.DISABLE FUNCTION
7.1% PRECISION (@ Tj = 25°C) INTERNAL
REFERENCE VOLTAGE
8.TRANSITION MODE OPERATION
9.TOTEM POLE OUTPUT CURRENT: ±400mA
10.DIP-8/SO-8 PACKAGES
Hqew.nte provide electronic component L6561 spot suppliers, PDF material download, etc. for dimension library electronic market nets Its website, dimension library electronic market nets is famous electronic components, IC trading website,other hot model lm358,lm317,ne555,lm324,lm339,I suggest to you visit the site.
1.VERY PRECISE ADJUSTABLE OUTPUT
OVERVOLTAGE PROTECTION
2.MICRO POWER START-UP CURRENT (50μA
TYP.)
3.VERY LOW OPERATING SUPPLY
CURRENT(4mA TYP.)
4.INTERNAL START-UP TIMER
5.CURRENT SENSE FILTER ON CHIP
6.DISABLE FUNCTION
7.1% PRECISION (@ Tj = 25°C) INTERNAL
REFERENCE VOLTAGE
8.TRANSITION MODE OPERATION
9.TOTEM POLE OUTPUT CURRENT: ±400mA
10.DIP-8/SO-8 PACKAGES
Hqew.nte provide electronic component L6561 spot suppliers, PDF material download, etc. for dimension library electronic market nets Its website, dimension library electronic market nets is famous electronic components, IC trading website,other hot model lm358,lm317,ne555,lm324,lm339,I suggest to you visit the site.
Wednesday, April 6, 2011
The features about ic components MAX8732A
The ic components MAX8732A features a 200kHz/5V and 300kHz/3.3V SMPS for highest efficiency, while the MAX8733A features a 400kHz/5V and 500kHz/3.3V SMPS for “thin and light” applications. The MAX8734A provides a pinselectable switching frequency, allowing either 200kHz/300kHz or 400kHz/500kHz operation of the 5V/3.3V SMPSs, respectively.
The electronic components MAX8732A/MAX8733A/MAX8734A are available in 28-pin QSOP packages and operate over the extended temperature range (-40°C to +85°C).
The electronic component MAX8732A/MAX8733A/MAX8734A are pin-for-pin upgrades to the
MAX1777/MAX1977/MAX1999.The MAX1999 evaluation kit (EV kit) can be used to evaluate the MAX8732A/MAX8733A/MAX8734A.
The electronic components MAX8732A/MAX8733A/MAX8734A are available in 28-pin QSOP packages and operate over the extended temperature range (-40°C to +85°C).
The electronic component MAX8732A/MAX8733A/MAX8734A are pin-for-pin upgrades to the
MAX1777/MAX1977/MAX1999.The MAX1999 evaluation kit (EV kit) can be used to evaluate the MAX8732A/MAX8733A/MAX8734A.
Saturday, April 2, 2011
Ic components ISL28190 detailed information from Hqew.net
Hqew.net offer ic components ISL28190,plenty of suppliers ISL28190 PDF material,Hqew.net is currently the largest electronic nets Electronic components trading website, dedicated to one of suppliers and buyers to provide high quality services.
The electronic components ISL28190 and electronic component ISL28290 are tiny single and dual ultra-low noise, ultra-low distortion operational amplifiers.
Fully specified to operated down to +3V single supply. These amplifiers have outputs that swing rail-to-rail, and an input common mode voltage that extends below ground (ground sensing).
The ISL28190 and ISL28290 are unity gain stable with an input referred voltage noise of 1nV/√Hz. Both parts feature 0.00017% THD+N @ 1kHz.
The ISL28190 is available in the space-saving 6 Ld μTDFN (1.6mmx1.6mm) and 6 Ld SOT-23 packages. The ISL28290 is available in the 10 Ld μTQFN (1.8mmx1.4mm) and 10 Ld
MSOP packages. All devices are guaranteed over -40°C to +125°C.
The electronic components ISL28190 and electronic component ISL28290 are tiny single and dual ultra-low noise, ultra-low distortion operational amplifiers.
Fully specified to operated down to +3V single supply. These amplifiers have outputs that swing rail-to-rail, and an input common mode voltage that extends below ground (ground sensing).
The ISL28190 and ISL28290 are unity gain stable with an input referred voltage noise of 1nV/√Hz. Both parts feature 0.00017% THD+N @ 1kHz.
The ISL28190 is available in the space-saving 6 Ld μTDFN (1.6mmx1.6mm) and 6 Ld SOT-23 packages. The ISL28290 is available in the 10 Ld μTQFN (1.8mmx1.4mm) and 10 Ld
MSOP packages. All devices are guaranteed over -40°C to +125°C.
Subscribe to:
Posts (Atom)